beam_surface
A beam creates a pipe which connects two polygons at each end. The polygons must have the same number of vertices but may lie in planes which are not parallel to each other. For the description of the parameters involved see the image below.
In the following example, the variable [poly] dictates the the number of vertexes in each polygon at the ends of the
beam.
Works with MeshViewer: Yes.
Works with GeometryViewer: No.
Element |
Description |
|---|---|
Attribute |
Type |
Description |
|---|---|---|
|
|
Example:
<beam_surface name="example_beam_surface">
<beam longitudinal_mesh_count="20" axial_mesh_count="20">
<define name="poly" value="50"/>
<define name="radius" value=".5"/>
<define name="z_start_max" value="-.25"/>
<define name="z_start_min" value="-.75"/>
<define name="z_end_max" value=".75"/>
<define name="z_end_min" value=".25"/>
<loop variable="i" start="0" end="[poly]" step="1">
<start_line x1="{[radius]*TMath::Cos(2.*TMath::Pi()*[i]/[poly])}" y1="{[radius]*TMath::Sin(2.*TMath::Pi()*[i]/[poly])}" z1="{([z_start_max]+[z_start_min])*.5 + ([z_start_max]-[z_start_min])*TMath::Cos(2.*TMath::Pi()*[i]/[poly])}" x2="{[radius]*TMath::Cos(2.*TMath::Pi()*(([i]+1) mod [poly])/[poly])}" y2="{[radius]*TMath::Sin(2.*TMath::Pi()*(([i]+1) mod [poly])/[poly])}" z2="{([z_start_max]+[z_start_min])*.5 + ([z_start_max]-[z_start_min])*TMath::Cos(2.*TMath::Pi()*(([i]+1) mod [poly])/[poly])}"/>
<end_line x1="{[radius]*TMath::Cos(2.*TMath::Pi()*[i]/[poly])}" y1="{[radius]*TMath::Sin(2.*TMath::Pi()*[i]/[poly])}" z1="{([z_end_max]+[z_end_min])*.5 + ([z_end_max]-[z_end_min])*TMath::Cos(2.*TMath::Pi()*[i]/[poly])}" x2="{[radius]*TMath::Cos(2.*TMath::Pi()*(([i]+1) mod [poly])/[poly])}" y2="{[radius]*TMath::Sin(2.*TMath::Pi()*(([i]+1) mod [poly])/[poly])}" z2="{([z_end_max]+[z_end_min])*.5 + ([z_end_max]-[z_end_min])*TMath::Cos(2.*TMath::Pi()*(([i]+1) mod [poly])/[poly])}"/>
</loop>
</beam>
</beam_surface>
Used as:
<beam_surface>in <geometry>
More information
Explained in: Complex Shapes in KGeoBag
Appears in the documentation:
Complex Shapes in KGeoBag (Beam Surface, Multi-cut surfaces)
Used in example configurations: