geometry
Element |
Description |
|---|---|
This produces an annulus centered on the z axis. |
|
For visualization, see <beam_surface>. |
|
A beam creates a pipe which connects two polygons at each end. |
|
Produces an axis aligned rectangular prism. |
|
Generates a conical space centered on the local z axis. |
|
Generates a cone centered on the z axis. |
|
For visualization, see <conic_section_port_housing_surface>. |
|
This shape is a cut cone surface with circular ports. |
|
Produces a cut cone volume (frustrum). |
|
Produces a truncated cone centered on the local z-axis. |
|
Generates a tubular frustrum (a cut cone with central axially symmetric void). |
|
Produces an angularly limited toroidal section centered on the z axis. |
|
Produces a cylinder space centered on the local z axis. |
|
Generates a cylinder centered on the z axis. |
|
Creates a tube, (a hollow cylinder with finite wall thickness). |
|
This produces a disk centered on the local z-axis. |
|
Generates a volume by extruding a cycle (cynlinder). |
|
This generates the surfaced produced by extruding a circle (this is the same as a cylinder). |
|
This generates a surface by extruding a poly-line. |
|
Generates a volume by extruding a poly-loop. |
|
This generates a surface by extruding a poly-loop. |
|
For visualization, see <extruded_surface>. |
|
With this element it is possible to create an extruded surface (from a poly-loop like curve) with arbitrary holes in it. |
|
A flattened circle surface is just a surface with circular shape, where (x,y,z) are the coordinates for the center of the circle and r is the radius: |
|
A flattened poly loop surface is a surface consisting of several lines, arcs or both, creating a polygon of your desired shape. |
|
For visualization, see <port_housing_surface>. |
|
The shape creates a tube-like surface with circular or rectangular pump ports (e.g. |
|
For visualization, see <rod_surface>. |
|
The rod element can be used to create a rod like structure along a series of linear segments in three dimensional space. |
|
Generates a volume enclosed by a surface of revolution produced from rotating an arc segment. |
|
This type generates the surface of revolution formed by an arc that is rotated around the x-axis. |
|
Generates a volume by rotating a circle (torus). |
|
This type generates the surface of revolution created by rotating a circle around the local x-axis. |
|
Generates a volume enclosed by a surface of revolution produced from rotating a line segement. |
|
This type generates the surface of revolution formed by a line that is rotated around the x-axis. |
|
Generates a volume enclosed by a surface of revolution produced from rotating a poly-line. |
|
This type generates the surface of revolution created by rotating a poly-line around the local x-axis. |
|
Generates a volume enclosed by a surface of revolution produced from rotating a poly-loop |
|
This type generates the surface of revolution created by rotating a poly-loop around the local x-axis. |
|
For visualization, see <rotated_surface>. |
|
This shape is very similar to rotated poly-line surface in Basic Shapes in KGeoBag but with other variables. |
|
This produces an angularly limited portion of a surface of revolution from an arc that is rotated around the local x-axis. |
|
This produces an angularly limited portion of a surface of revolution from a circle that is rotated around the local x-axis. |
|
This produces an angularly limited portion of a surface of revolution from a line that is rotated around the local x-axis. |
|
This produces an angularly limited portion of a surface of revolution from a poly-line that is rotated around the local x-axis. |
|
This produces an angularly limited portion of a surface of revolution from a poly-loop that is rotated around the local x-axis. |
|
For visualization, see <stl_file_surface>. |
|
|
|
Produces a torus centered on the local z axis. |
|
Generates a torus centered on the local z axis. |
Attribute |
Type |
Description |
|---|---|---|
|
|
Used as:
<geometry>at the top level<geometry>in <kasper>
More information
Appears in the documentation:
Used in example configurations:
<Kassiopeia/XML/Examples/DipoleTrapMeshedSpaceSimulation.xml>
<Kassiopeia/XML/Examples/VTK/DipoleTrapMeshedSpaceSimulation.xml>
<Kassiopeia/XML/Examples/VTK/PhotoMultiplierTubeSimulation.xml>
KEMField/Source/XML/Examples/ElectricFieldExplicitSuperposition.xml